TMC-20214: Buses with Incoming Paths Failing Setup Analysis with Multiple Sequential Adder Chains
Description
Violations of this rule indicate buses that are endpoints of setup-failing timing paths that contain multiple back-to-back adder chains.
Adder chains result in large segments of delay that the Compiler cannot optimize. Minimize the number of independent adder chains on a particular timing path by registering the output of each chain.
Parameters
| Name | Description | Type | Default Value | Min Value | Max Value |
|---|---|---|---|---|---|
| maximum_setup_slack | Reports a violation for timing paths that have a setup slack below the value of this parameter. | double | 0.0 | ||
| to_clock_filter | Reports a violation for timing paths that end at a register in a clock domain that matches the value of this parameter. | string | * | ||
| minimum_number_of_adders | Reports a violation for timing endpoints that are preceded by a number of independent adder chains greater than or equal to this value. | integer | 3 | ||
| minimum_number_of_soft_mult_chains | Reports a violation for timing endpoints that are preceded by a number of independent adder chains that are implementing multiplier logic greater than or equal to this value. | integer | 2 |
Recommendation
Add one or more pipeline register stages between the adder chains.
Severity
Medium
Tags
| Tag | Description |
|---|---|
| logic-levels | Design rule checks which flag potentially problematic amounts of logic on a timing path. |
Device Family
- Intel®Stratix® 10
- Intel®Agilex™
- Intel®Arria® 10
- Intel®Cyclone® 10 GX