enable_ccpp_removal (::quartus::sta)

The following table displays information for the enable_ccpp_removal Tcl command:

Tcl Package and Version

Belongs to ::quartus::sta 1.0

Syntax enable_ccpp_removal [-h | -help] [-long_help] [-depth <depth> ] [-off] [-on]
Arguments -h | -help Short help
-long_help Long help with examples and possible return values
-depth <depth> maximum clock tree depth for cppp removal
-off Disable this setting.
-on Enable this setting.
Enables (or disables) common clock path pessimism
(CCPP) removal during slack computation. CCPP removal
can improve timing results by removing min/max delay
differences from common portions of clock paths.
Enabling CCPP removal increases the time required to
perform timing analysis.

When specified, the optional depth parameter limits
the clock tree depth used for CCPP removal. This is
generally not applicable to FPGA compilations where
the clock tree is fixed, but for large HardCopy
designs with potentially deep synthesized clock trees
this can reduce outlier run time.

When not specified, or when specified with a value of
0, the complete clock tree is used for CCPP
removal (i.e. full clock-tree depth).
Example Usage
project_open top

# Report timing without CCPP removal

# Enable CCPP removal and re-report timing.

Return Value Code Name Code String Return
TCL_OK 0 INFO: Operation successful
TCL_ERROR 1 ERROR: Timing netlist does not exist. Use create_timing_netlist to create a timing netlist.