INTEL DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH
WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH
WILL BE UNINTERRUPTED OR ERROR-FREE.

//****************************************************************
quartus-24.1-0.19-readme.txt
Readme file for Intel(R) Quartus(R) Prime 24.1 Patch 0.19
Copyright (C) Intel Corporation 2019 All right reserved.
Patch created on June 11, 2024, 9:48 p.m.
Patch Case#: 15013607416
Patches included: 
Patches conflicted: 
Patch prerequisites: 

//****************************************************************

Description:

Patch# 0.19: 
 Customer will face a DDR calibration issue by using the old converter IP 1.1.0 version file when booting up the device. This issue can be resolved by an IP workaround update to 1.2.0 version. 

Customer will also face the issue of not being able to connect the PHY (at the FPGA) due to missing data in the hps_handoff binary data.

KDB: 
1. https://www.intel.com/content/www/us/en/support/programmable/articles/000098628.html 
2. https://www.intel.com/content/www/us/en/support/programmable/articles/000098687.html 




Caution - You must either have previously installed the
          Intel(R) Quartus(R) Prime 24.1 software or must
          install the Intel(R) Quartus(R) Prime 24.1 software
          before installing this patch. Otherwise, the patch will
          not be installed correctly and the Intel(R) Quartus(R) Prime
          software will not run properly.

Note:
<Patches included> - means this patch includes those patches. If you
    already installed those patches, you can safely install this new
    patch on top.
<Patches conflicted> - means this patch conflicts with those patches.
    If you have any of those patches installed, don't install this patch.
    Contact Intel for further support.