VHDL Signed Multiplier-Accumulator Design Example v2.0 README File This readme file for the VHDL Signed Multiplier-Accumulator Design contains information about the design example in the Quartus ll HDL Templates. Ensure that you have read the information on the VHDL Signed Multiplier-Accumulator Design Example web page before using the example. This file contains the following information: o Package Contents o Software Tool Requirements o Release History o Technical Support Package Contents ================ VHDL Signed Multiplier-Accumulator Design Example v2.0 Software Tool Requirements ========================== The Quartus II software version 9.1 or later, or supported versions of third-party synthesis tools. Contact your local sales representative if you do not have the necessary software tools. Release History =============== Version 1.0 ----------- - First release of example. Version 2.0 ----------- - Updated release using Quartus ll 9.1 HDL templates Technical Support ================= Although we have made every effort to ensure that this design example works correctly, there might be problems that we have not encountered. If you have a question or problem that is not answered by the information provided in this readme file or the example's documentation, refer to the Altera technical support web site: http://www.altera.com/mysupport Last updated February, 2010 Copyright (c) 2010 Altera Corporation. All rights reserved.